Please use this identifier to cite or link to this item: http://dspace.univ-temouchent.edu.dz/handle/123456789/2666
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBELLOUATI, Mohamed-
dc.contributor.authorBOUDMIA, Abd el Kader-
dc.date.accessioned2024-02-26T15:09:17Z-
dc.date.available2024-02-26T15:09:17Z-
dc.date.issued2016-
dc.identifier.citationhttps://theses.univ-temouchent.edu.dz/opac_css/doc_num.php?explnum_id=1372en_US
dc.identifier.urihttp://dspace.univ-temouchent.edu.dz/handle/123456789/2666-
dc.description.abstractThe stepper motor is widely used as a controlling and driving machine in open loop controlle systems. As a high speed rotating equipement, stepper motor must have rising and falling process avoiding losing step and over step. In this project we have realised a chip circuit to controlle and drive a stepper motor, using a computer as a master controller, this system based on LabWIEW has a good interface, the easy programing to control. The chip is based on a Microchip microcontroller PIC18F45550 in order to controlle a stepper motor using a dual H-bridge as a driver. The microcontroller, by a universal serial bus (USB) receive the computer’s data, then the processor embedded in the chip must analyze this data and transform them into electrical pulses to rotate the stepper motor.en_US
dc.titleREALISATION D’UNE COMMANDE NUMERIQUE D’UN MOTEUR PAS A PAS ASSISTE PAR ORDINATEUR.en_US
Appears in Collections:Electronique

Files in This Item:
File Description SizeFormat 
REALISATION D’UNE COMMANDE NUMERIQUE D’UN MOTEUR PAS A PAS ASSISTE PAR ORDINATEUR..pdf8,8 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.